The automatic mixing sewage pump is a new environmentally friendly product developed using a hydraulic model. It has specific functions in discharging solid particles and long fiber garbage, as well as reducing sedimentation in sewage pits.
The automatic mixing sewage pump is suitable for the discharge of severely polluted wastewater in factories and commercial areas, sewage discharge stations in main residential areas, water distribution systems in urban sewage treatment plants, drainage stations in civil air defense systems, water supply equipment in water plants, sewage discharge in hospitals and hotels, municipal engineering construction sites, mining supporting machines, rural biogas digesters, farmland irrigation and other industries. It can also be used to transport granular sewage and pollutants, as well as clean water and weakly corrosive media.
Structural Characteristics Description
1. Adopting a unique dual channel unobstructed impeller structure, it improves the flow and discharge capacity of sewage and pollutants.
2. The automatic stirring device generates strong stirring force, which mixes the sediment in the pool into suspended solids and sucks them into the impeller for discharge, achieving the effect of dredging.
3. The partition divides the base into two parts, and mixing and water inlet do not affect each other.
4. The mechanical seal is a double end mechanical seal, which is kept in the oil chamber for a long time to ensure the safe and reliable operation of the water pump.
5. The fluid dynamic seal of the secondary impeller structure not only serves as an auxiliary seal to protect the mechanical seal, but also balances axial forces and extends the service life of the bearing.
6. There is no leakage detection probe in the pump connection chamber. When leakage occurs, the probe sends a signal and the control system implements protection for the pump. Our company can provide a fully automatic safety protection control cabinet.
7. The stator of the motor adopts B-level and F-level insulation, and is equipped with a thermal protector. When the motor is overloaded and heats up, the protector will act in a timely manner to protect the pump and motor.
8. There is an oil-water probe installed in the oil chamber. When the mechanical seal is damaged, water enters the oil chamber and the probe sends a signal for the control system to protect the water pump.
9. Equipped with an internal circulation cooling system, it can ensure the normal operation of the water pump at low water levels in the pool.
Automatic mixing sewage pump is a type of sewage pump, and its structure is different from ordinary sewage pumps. There is an automatic mixing device at the inlet end of the pump body, which is usually called a mixing plate.
The design of the automatic mixing and sewage pump mixing plate allows the sludge and dirt settled in the sewage to be stirred into a slurry mixture by the force of the mixing plate and enter the pump chamber. The pump works smoothly to discharge the sludge and achieve the cleaning effect. This is an advantage that other sewage pumps cannot match.
