The anti wear slurry pump applied in the sedimentation tank of a sand making plant is a hydraulic equipment that integrates the motor and pump into the water or the bottom of the water to extract the medium, with simple operation and good performance. Suitable for conveying slurries containing abrasive solid particles such as mud, sand, gravel, coal slag, tailings, etc., mainly used in industries such as metallurgy, mining, power, chemical, environmental protection, river dredging, sand extraction, and municipal engineering.
After performance optimization, this type of pump product has a small volume, convenient installation and movement, slag extraction, and can operate stably for a long time under harsh working conditions. It is an ideal product to replace traditional vertical submerged pumps and submersible sewage pumps. There is an independent mixing impeller at the bottom of the pump body, which can mix solid particles such as mud and sand deposited at the bottom of the water into a mixed water flow and extract them together.
Structural features:
a. The main flow components such as the impeller and mixing impeller are made of high hardness high chromium alloy, which has strong corrosion and pollution discharge ability. The material hardness is better than that of the steel saw blade, and can pass through larger solid particles.
b. The overall equipment has been scientifically optimized by technology and engineers, resulting in a significant reduction in the total investment of the unit.
c. The whole machine is a dry lower pump type, and the motor adopts an oil chamber sealing method. It is equipped with a hard alloy mechanical seal inside, which can effectively prevent high-pressure water and impurities from entering the oil chamber and motor cavity.
d. In addition to the main impeller, a coaxial stirring impeller is also installed, which can stir the sediment deposited at the bottom of the water into turbulence and extract it.
e. The slurry pump worker submerges underwater, with low equipment vibration and no suction limit, resulting in better slag suction, dredging, and sewage discharge effects
Partial use:
A, Dredging, sand pumping, dredging, and removal of mud and sand in ports, rivers, lakes, etc.
B, High temperature waste residue, boiler high-temperature slurry, heat-resistant iron oxide scale, metallurgical and other high-temperature slurry pumps discharge.
C, Municipal pipelines, water conservancy projects, river dredging and dredging, sand pumping and sea filling, and other sand pumping and transportation.
D, Remove steel slag, waste slag, fly ash from thermal power plants, tailings, coal washing, beneficiation, gold mining, etc.
E, Sedimentation tanks, hydropower stations, reservoirs, waterways, power plants, sunken wells, mines, fish ponds, sludge and sediment removal.
F, Transporting media such as gold sand, iron sand, steel sand, quartz sand, tailings, etc.
G, Discharge of sediment, mud, sewage, and impurities during construction.
