News - China Centrifugal Pump Manufacturers Suppliers Factory

30/Oct2025

What Are The Requirements For Installing Water Pump Pipelines

1.When installing the inlet pipeline, the horizontal section should be level or upward curved This will cause air to accumulate in the inlet pipe, reduce the vacuum level of the water pipe and pump...

29/Oct2025

What Is The Problem Of Multi-stage Centrifugal Pump Not Producing Water Durin...

What is the reason for the sudden failure of multi-stage centrifugal pumps to produce water during operation? Let's find the root cause of why multi-stage centrifugal pumps do not produce water...

28/Oct2025

What Is The Difference And Principle Of Use Between Vortex Pump And Centrifug...

Vortex pump (vortex pump): a pump that uses the force of a rotating impeller on a liquid to transfer kinetic energy in the direction of liquid movement by giving it impulse; The quota includes: sin...

27/Oct2025

What Are The Characteristics And Uses Of Pulp Pumps

What are the characteristics and uses of pulp pumps compared to traditional types of pumps? If you are interested in pulp pumps, I believe you will definitely learn about this information. Next, I ...

26/Oct2025

What Are The Characteristics And Uses Of Multi-stage Vertical Centrifugal Pumps

Multi stage vertical centrifugal pump (hereinafter referred to as multi-stage pump) is a non self-priming multi-stage vertical centrifugal pump designed and manufactured by absorbing advanced techn...

25/Oct2025

Correctly Using A Pump With A Middle Opening Is Beneficial For Extending Its ...

1,Correct selection and installation The selection of the medium opening pump should be based on the liquid being transported, and the required performance should be checked, including analysis of ...

24/Oct2025

How To Disassemble, Inspect And Clean A Centrifugal Pump

1, Preparation work before dismantling centrifugal pump 1. Close the inlet and outlet valves and drain the liquid from the pump body. 2. Disconnect the power supply to ensure safe operation. 3. Acc...

23/Oct2025

What are the main characteristics of stainless steel submersible sewage pumps

1.The stainless steel submersible sewage pump adopts a large flow channel anti clogging hydraulic component design, greatly improving the ability of sewage to pass through. It can effectively pass ...

22/Oct2025

What Are The Common Faults Of Corrosion-resistant Centrifugal Pumps

Working conditions: 1. The suction pressure is ≤ 1.6MPa, or the maximum working pressure of the pump system is ≤ 1.6MPa, that is, the pump suction inlet pressure+pump head is ≤ 1.6MPa, and...

21/Oct2025

What Is The Reason For Water Pump Overcurrent

1, Check the power supply, which should be within the range specified on the pump nameplate, such as voltage of 440V ± 5% and frequency of 60Hz. Low voltage can easily cause motor overcurren...

First 17 18 19 20 21 22 23 Last20/123