The vertical pipeline sewage pump is easy to install and has a wide range of uses. It can be used as a general pipeline pump to pressurize water for high-rise buildings, and it can also transport sewage containing granular fibers. In addition to being suitable for conveying sewage, it is also suitable for drainage pumps, filtering, washing and condensing. Circulation pump, etc. This series of pumps adopts a unique impeller structure and a new type of mechanical seal, which can effectively convey solids and long fibers. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel. It is similar to a curved pipe with the same cross-section and has very good flow capacity. With a reasonable volute chamber, the pump has high efficiency. The high and the impeller have been tested for dynamic and static balance, so that the pump has no vibration during operation.
The vertical pipeline sewage pump is easy to install and has a wide range of uses. It can be used as a general pipeline pump to pressurize water for high-rise buildings, and it can also transport sewage containing granular fibers. In addition to being suitable for conveying sewage, it is also suitable for drainage pumps, filtering, washing and condensing. Circulation pump, etc. This series of pumps adopts a unique impeller structure and a new type of mechanical seal, which can effectively convey solids and long fibers. Compared with the traditional impeller, the impeller of the pump adopts the form of single flow channel or double flow channel. It is similar to a curved pipe with the same cross-section and has very good flow capacity. With a reasonable volute chamber, the pump has high efficiency. The high and the impeller have been tested for dynamic and static balance, so that the pump has no vibration during operation.
Use conditions of pipeline type non-clogging sewage pump
A. The ambient temperature of the pipeline sewage pump is ≤40℃, the humidity is ≤95%; the altitude is ≤1000 meters.
B. The temperature of the medium does not exceed 60℃, and the weight of the medium is 1～1.3kg/dm3.
C. The use range of cast iron material is PH5~9.
D. Stainless steel material can use general corrosive medium.
E. The altitude of the operating environment should not exceed 1000 meters. When the above conditions are exceeded, it should be put forward when ordering, so as to provide you with more reliable products.
Note: If the user has special requirements for temperature, medium, etc., please indicate the details of the conveying medium when ordering, so that the unit can provide more reliable products.
Features of pipeline type non-clogging sewage pump
1. The pump and the motor are directly connected and coaxial, which is a mechatronics product with compact structure and stable performance.
2. The large flow channel is designed with anti-clogging hydraulic components, which greatly improves the ability of dirt to pass through, and can effectively pass through fibrous substances that are 5 times the diameter of the pump and solid particles with a diameter of about 50% of the diameter of the pump.
3. The design is reasonable, the matching motor is reasonable, the efficiency is high, the noise is low, and the energy saving effect is remarkable.
4. The mechanical seal is made of hard wear-resistant tungsten carbide, which has the characteristics of durability and wear resistance, and can make the pump run safely and continuously for more than 8,000 hours.
5. The pump is a vertical structure, the center line of the inlet and outlet is on the same horizontal line, and the specifications of the inlet and outlet flanges are the same, so the installation and disassembly are very convenient.
6. It occupies a small area and does not need to build a machine room, which can save a lot of infrastructure costs; a protective cover is added to the fan blade end of the motor, and the whole machine can be placed outside for work.
