Winter has come quietly without knowing it. Due to the weather, the submersible pump for wells is likely to freeze for a long time when it is placed for a long time. At this time, it is unfavorable for the equipment itself. It not only affects the use, but also has a corresponding impact on its quality, so how should we prevent it? The following Shenyang Haiquan Submersible Pump Co., Ltd. will introduce to you:
1. The water in the well submersible pump can be drained, and water can be added when using, so as to prevent it from freezing and cracking the pump.
2. If the equipment freezes, you can pour hot water or boiling water into the water pump to melt the ice, or heat the water pump shell.
3. Put the well submersible pump in a normal temperature environment, below zero.
4. Select the heat preservation type water pump and add steam or hot water to the heat preservation layer. To prevent the pump from freezing.
5. You can also choose other types of pumps. When using, just add water.
6. When used in a deep well, put the submersible pump for the well into the well. Generally, the underground water pump is deep from the ground and will not freeze.
In general, in winter, if the temperature is too low, the well submersible pump will be damaged. In order to ensure the quality of the equipment, we need to do all its work well, so as to prevent accidents, it is better to do it once. use the equipment properly.
Shenyang well pump is a commonly used equipment. The product features of this equipment are also very obvious. Its installation is simple, the operation is safer, and the work efficiency has been significantly improved. In addition to these characteristics, it also What are the advantages? Next, we will simply take a look at it, hoping to be helpful to your future use, which can mainly include the following five aspects.
1. From the perspective of the structure of the well submersible pump, it has the characteristics of compact structure, small volume and light weight.
2. In actual use, its installation, use and maintenance are convenient, and the transportation is safe and reliable.
3. The performance of the equipment, the single-stage lift is high, and the single-stage pump shell height is short, which shortens the height of the whole machine and increases the stability of operation.
4. The casing of the equipment is made of ductile iron or cast steel, which can improve the pressure bearing coefficient of the submersible pump casing for wells.
5. Small axial force increases the service life of the motor during use.
Although the characteristics and functions of the submersible pump are advantages, we cannot lack of maintenance work for it. First of all, in addition to regular maintenance of it, we also need to check it from time to time. If a fault is found, it should be replaced and repaired in time.
